Safety Razor Information
Merkur of Solingen Futur Safety Razor
Below is a guide to renewing a double edged blade into the Futur Safety Razor.
|
Step 1
|
Step 2
|
Step 3
|
Step 4
|
Step 5
|
 |
 |
 |
 |
 |
- Step 1. Hold Safety Razor firmly and push up the lid.
- Step 2. Once loosened pull of the lid.
- Step 3. Very carefully place blade between index finger and thumb and insert into the Safety Razor.
- Step 4. Once blade is seated in place, then push down the lid.
- Step 5. Now set the Safety Razor for preferance. Adjustable poistions from 1-6 ( we recommend starting with position 1 )
Merkur of Solingen Vision 2000 Safety Razor
Below is a guide to renewing a double edged blade into the Vision 2000 Safety Razor and general maintenance.
|
Step 1
|
Step 2
|
Step 3
|
Step 4
|
 |
 |
 |
 |
 |
 |
 |
 |
|
Step 5
|
step 6
|
step 7
|
step 8
|
Shaving the face
- Step 1. To open Safety Razor, turn clockwise (approx. 5 turns)
- Step 2. Insert blade
- Step 3. To close Safety Razor, turn counter-clockwise (until resistance is noticable)
- Step 4. Space between blade & edge can be set individually by memorising prefered constellation of letters -V-I-S-I-O-N-
- Step 5. Removal of the used blade
- Step 6. For thorough cleaning of Safety Razor remove blade. Press flaps against the base of the top. Turn handle counter-clockwise, until bottom lid comes off.
- Step 7. Remove bottom lid through the eccentric perforation from the groove of the guide bar, and pull it up out of the razor body with open flaps.
- Step 8. Take off the handle of Safety Razor, rinse the parts, if necessary use a lime solvent before rinsing. Insert blade only after reassembly.
Click here to view our Safety Razors